Tabata function: display format is Fn MM: SS (nth loop training time) and Cn MM: SS (nth loop rest time). Training time is 20 seconds, rest time is 10 seconds, loop 8 times. This function For built-in functions, you can directly enter this function by pressing Tabata directly on the remote control and then press the start button to enter the training time. The training time is over, the buzzer sounds, the rest time ends, and the buzzer sounds three times. The last cycle training The end of the (ie F8) represents the end of the entire training period, at which time the beep sounds a long tone.
FGB function: Display format is Fn MM: SS (nth loop training time) and Cn MM: SS (nth loop rest time). FGB has two training methods:
FGB1: 5 minutes training, 1 minute break, 5 cycles
FGB2: 5 minutes training, 1 minute break, 3 cycles
Enter by pressing the remote control FGB button. The first press will display 1 -- --, the second time display 2 -- --, users can choose the training cycle that suits their needs according to their needs.
Intermittent timing function: This feature is also a feature of this product, but also the most important function. With this feature, users can freely set their own training time and rest time as well as the number of cycles. The display format is Fn MM: SS (nth group training time) and (nth group rest time). By pressing the number keys 0-9 to enter the setting, up to 10 sets of training and rest time can be set. For example, press 0 to enter the first set of settings. It can be used after the setting is completed. If you still need to use this setting next time, just press the number key 0, then press Start to enter the last setting, you can use it without setting it again.
Setting method:
Select any number key to enter the setting mode. For example, press 1 and the clock will display P1. Then press Edit/Edit. The screen will display F1 MM:SS. Enter the time required for training, such as 10 seconds, then change MM:SS to 00:10. . Then continue to press the Edit/Edit button to set the second time. If the time is the same every time, then you don't need to continue to press the edit button, but you can press the OK/OK button to set the number of cycles. After setting the number of cycles and pressing the confirmation button again, the entire setting is completed.
Clock function: Turns on the clock function. The display format is H1 HH:MM (24-hour clock) or H2 HH:MM (12-hour clock). To adjust the time, press the Edit button and enter the time
Clock parameters:
LED luminous font: 2.3 inches or 5.84 cm; seven-segment digital tube, 2 blue 4 red;
Product size: 38.6x12x3.5cm;
Control method: IR remote control;
Clock accuracy: less than 2 minutes / year;
Working voltage: 12VDC; (Adapter input is 100-240VAC, output is 6VDC)
Use the venue: living room, gym, garage, office, etc.
Package:
1x Sport clock
1x AC/DC Adapter
2x brackets and screws
1x remote control
1x user manual
Remote battery do not included. It is 2 x AAA battery
